Equipment technical specifications:

All motors are equipped with sine servo motors and controllers, with 1.1KW for winding and 4KW for winding.

The maximum take-up speed is controlled at 200RPM/min.

Transmission requires the use of synchronous belts, and pulleys with tapered sleeves are required (note that other pulleys are not accepted)

The PLC requires the use of Siemens SAMART200, equipped with an AM06 module, and the touch screen requires the use of Kunlun on state POR screen.

The wiring requires the use of ball screw with a diameter of 35mm or more, and an encoder is required to detect the position of the wiring.

Control all requirements through communication and emergency stop button.